- Product Description
- Product Reviews
- Related Products
The popular Climbing RB anchor
- Size: 1/2″
- Breaking Strength: 2,700 lbf / 12kn
- Compliance: ANSI Z359.7 & CE-EN 795
- Weight: 0.2-lbs
Critical Piece of Gear
Posted by Judd on 15th Nov 2014
I use these at work for everything from establishing new climbing routes, to building via ferratas, and hauling huge boulders out of the river after a major flood. The design is simple yet extremely strong/secure. I have found that a nail punch is the best solution for removal after loading. (I've used keys and sticks before though with minor success!)
I only have minor issues with the removal. If set hard, you sometimes need two hands to remove (one to hold nail punch while the other is pulling on the trigger). This is especially inconvenient for routes that traverse a blank wall.
Another issue with removal is mainly user error. If the removable bolt gets pushed to the back of the hole and then set hard, there is no clean way to remove. One way to avoid this is to drill the holes deep enough so it physically cannot reach the back. Out of more than 1,000 holes though, I have only lost one removable bolt to this issue.
A Must Have Piece of Gear!!
Posted by Christopher Gibson on 26th Aug 2014
Setting routes in the world's tallest indoor climbing gym is no easy task, but with the Climb Tech Removable Bolt positioning just got a whole lot easier. The removable bolt is easy to use with the thumb loop trigger simalar to using a BD Cam and is as easy to extract and has no problem holding me and my gear.
Posted by chris and aly on 3rd Jun 2014
These come in handy for temporary anchors when setting up new routes. Cool design, nothing else like it.
Posted by David on 9th May 2014
Super handy for putting a route up from the ground up.
Still in progress
Posted by piz : ) on 4th Feb 2014
Just used it at the house (in the boulders that i use my drill battery up on. I made sure that i wont get them stuck while bolting routes, but that action has been good.
simple to use and clean.